Introduction
Ansible Vault is a feature that allows users to encrypt values and data structures within Ansible projects. This provides the ability to secure any sensitive data that is necessary to successfully run Ansible plays but should not be publicly visible, like passwords or private keys. Ansible automatically decrypts vault-encrypted content at runtime when the key is provided.
In this guide, we will demonstrate how to use Ansible Vault and explore some recommended practices to simplify its use. We will be using an Ubuntu 20.04 server for the Ansible control machine. No remote hosts are needed.
Prerequisites
To follow along, you will need an Ubuntu 20.04 server with a non-root user with sudo privileges. You can follow our Ubuntu 20.04 initial server setup guide to create a user with the appropriate permissions.
On the server, you will need to install and configure Ansible. You can follow our tutorial on installing Ansible on Ubuntu 20.04 to install the appropriate packages.
Continue with this guide when your server is configured with the above requirements.
What is Ansible Vault?
Ansible Vault is a mechanism that allows encrypted content to be incorporated transparently into Ansible workflows. A utility called ansible-vault secures confidential data, called secrets, by encrypting it on disk. To integrate these secrets with regular Ansible data, both the ansible and ansible-playbook commands, for executing ad hoc tasks and structured playbook respectively, have support for decrypting vault-encrypted content at runtime.
Vault is implemented with file-level granularity, meaning that individual files are either encrypted or unencrypted. It uses the AES256 algorithm to provide symmetric encryption keyed to a user-supplied password. This means that the same password is used to encrypt and decrypt content, which is helpful from a usability standpoint. Ansible is able to identify and decrypt any vault-encrypted files it finds while executing a playbook or task.
Now that you understand a bit about what Vault is, we can start discussing the tools Ansible provides and how to use Vault with existing workflows.
Setting the Ansible Vault Editor
Before using the ansible-vault command, it is a good idea to specify your preferred text editor. A few of Vault’s commands involve opening an editor to manipulate the contents of an encrypted file. Ansible will look at the EDITOR environment variable to find your preferred editor. If this is unset, it will default to vi.
If you do not want to edit with vi editor, you should set the EDITOR variable in your environment.
Note: If you find yourself within a vi session accidentally, you can exit by hitting the Esc key, typing :q!, and then pressing Enter. If you are not familiar with the vi editor, any changes you make will likely be unintentional, so this command exits without saving.
To set the editor for an individual command, prepend the command with the environment variable assignment, like this:
EDITOR=nano ansible-vault . . .
To make this persistent, open your ~/.bashrc file:
nano ~/.bashrc
Specify your preferred editor by adding an EDITOR assignment to the end of the file:
~/.bashrc
export EDITOR=nano
Save and close the file when you are finished.
Source the file again to read the change into the current session:
. ~/.bashrc
Display the EDITOR variable to check that your setting was applied:
echo $EDITOR
nano
Now that you’ve established your preferred editor, we can discuss the operations available with the ansible-vault command.
How To Manage Sensitive Files with ansible-vault
The ansible-vault command is the main interface for managing encrypted content within Ansible. This command is used to initially encrypt files and is subsequently used to view, edit, or decrypt the data.
Creating New Encrypted Files
To create a new file encrypted with Vault, use the ansible-vault create command. Pass in the name of the file you wish to create. For example, to create an encrypted YAML file called vault.yml to store sensitive variables, you could type:
ansible-vault create vault.yml
You will be prompted to enter and confirm a password:
New Vault password:
Confirm New Vault password:
When you have confirmed your password, Ansible will immediately open an editing window where you can enter your desired contents.
To test the encryption function, enter some test text:
vault.yml
Secret information
Ansible will encrypt the contents when you close the file. If you check the file, instead of seeing the words you typed, you will see an encrypted block:
cat vault.yml
$ANSIBLE_VAULT;1.1;AES256
65316332393532313030636134643235316439336133363531303838376235376635373430336333
3963353630373161356638376361646338353763363434360a363138376163666265336433633664
30336233323664306434626363643731626536643833336638356661396364313666366231616261
3764656365313263620a383666383233626665376364323062393462373266663066366536306163
31643731343666353761633563633634326139396230313734333034653238303166
We can see some header information that Ansible uses to know how to handle the file, followed by the encrypted contents, which display as numbers.
Encrypting Existing Files
If you already have a file that you wish to encrypt with Vault, use the ansible-vault encrypt command instead.
For testing, we can create an example file by typing:
echo 'unencrypted stuff' > encrypt_me.txt
Now, you can encrypt the existing file by typing:
ansible-vault encrypt encrypt_me.txt
Again, you will be prompted to provide and confirm a password. Afterwards, a message will confirm the encryption:
New Vault password:
Confirm New Vault password:
Encryption successful
Instead of opening an editing window, ansible-vault will encrypt the contents of the file and write it back to disk, replacing the unencrypted version.
If we check the file, we should see a similar encrypted pattern:
cat encrypt_me.txt
$ANSIBLE_VAULT;1.1;AES256
66633936653834616130346436353865303665396430383430353366616263323161393639393136
3737316539353434666438373035653132383434303338640a396635313062386464306132313834
34313336313338623537333332356231386438666565616537616538653465333431306638643961
3636663633363562320a613661313966376361396336383864656632376134353039663662666437
39393639343966363565636161316339643033393132626639303332373339376664
As you can see, Ansible encrypts existing content in much the same way as it encrypts new files.
Viewing Encrypted Files
Sometimes, you may need to reference the contents of a vault-encrypted file without needing to edit it or write it to the filesystem unencrypted. The ansible-vault view command feeds the contents of a file to standard out. By default, this means that the contents are displayed in the terminal.
Pass the vault encrypted file to the command:
ansible-vault view vault.yml
You will be asked for the file’s password. After entering it successfully, the contents will be displayed:
Vault password:
Secret information
As you can see, the password prompt is mixed into the output of file contents. Keep this in mind when using ansible-vault view in automated processes.
Editing Encrypted Files
When you need to edit an encrypted file, use the ansible-vault edit command:
ansible-vault edit vault.yml
You will be prompted for the file’s password. After entering it, Ansible will open the file an editing window, where you can make any necessary changes.
Upon saving, the new contents will be encrypted using the file’s encryption password again and written to disk.
Manually Decrypting Encrypted Files
To decrypt a vault encrypted file, use the ansible-vault decrypt command.
Note: Because of the increased likelihood of accidentally committing sensitive data to your project repository, the ansible-vault decrypt command is only suggested for when you wish to remove encryption from a file permanently. If you need to view or edit a vault encrypted file, it is usually better to use the ansible-vault view or ansible-vault edit commands, respectively.
Pass in the name of the encrypted file:
ansible-vault decrypt vault.yml
You will be prompted for the encryption password for the file. Once you enter the correct password, the file will be decrypted:
Vault password:
Decryption successful
If you view the file again, instead of the vault encryption, you should see the actual contents of the file:
cat vault.yml
Secret information
Your file is now unencrypted on disk. Be sure to remove any sensitive information or re-encrypt the file when you are finished.
Changing the Password of Encrypted Files
If you need to change the password of an encrypted file, use the ansible-vault rekey command:
ansible-vault rekey encrypt_me.txt
When you enter the command, you will first be prompted with the file’s current password:
Vault password:
After entering it, you will be asked to select and confirm a new vault password:
Vault password:
New Vault password:
Confirm New Vault password:
When you have successfully confirmed a new password, you will receive a message indicating success of the re-encryption process:
Rekey successful
The file should now be accessible using the new password. The old password will no longer work.
Running Ansible with Vault-Encrypted Files
After you’ve encrypted your sensitive information with Vault, you can begin using the files with Ansible’s conventional tooling. The ansible and ansible-playbook commands both know how to decrypt vault-protected files given the correct password. There are a few different ways of providing passwords to these commands depending on your needs.
To follow along, you will need a vault-encrypted file. You can create one by typing:
ansible-vault create secret_key
Select and confirm a password. Fill in whatever dummy contents you want:
secret_key
confidential data
Save and close the file.
We can also create a temporary hosts file as an inventory:
nano hosts
We will add just the Ansible localhost to it. To prepare for a later step, we will place it in the [database] group:
hosts
[database]
localhost ansible_connection=local
Save and close the file when you are finished.
Next, create an ansible.cfg file in the current directory if one does not already exist:
nano ansible.cfg
For now, just add a [defaults] section and point Ansible to the inventory we just created:
ansible.cfg
[defaults]
inventory = ./hosts
When you are ready, continue on.
Using an Interactive Prompt
The most straightforward way of decrypting content at runtime is to have Ansible prompt you for the appropriate credentials. You can do this by adding the --ask-vault-pass to any ansible or ansible-playbook command. Ansible will prompt you for a password which it will use to try to decrypt any vault-protected content it finds.
For example, if we needed to copy the contents of a vault-encrypted file to a host, we could do so with the copy module and the --ask-vault-pass flag. If the file actually contains sensitive data, you will most likely want to lock down access on the remote host with permission and ownership restrictions.
Note: We are using localhost as the target host in this example to minimize the number of servers required, but the results should be the same as if the host were truly remote:
ansible --ask-vault-pass -bK -m copy -a 'src=secret_key dest=/tmp/secret_key mode=0600 owner=root group=root' localhost
Our task specifies that the file’s ownership should be changed to root, so administrative privileges are required. The -bK flag tells Ansible to prompt for the sudo password for the target host, so you will be asked for your sudo password. You will then be asked for the Vault password:
BECOME password:
Vault password:
When the password is provided, Ansible will attempt to execute the task, using the Vault password for any encrypted files it finds. Keep in mind that all files referenced during execution must use the same password:
localhost | SUCCESS => {
"changed": true,
"checksum": "7a2eb5528c44877da9b0250710cba321bc6dac2d",
"dest": "/tmp/secret_key",
"gid": 0,
"group": "root",
"md5sum": "270ac7da333dd1db7d5f7d8307bd6b41",
"mode": "0600",
"owner": "root",
"size": 18,
"src": "/home/sammy/.ansible/tmp/ansible-tmp-1480978964.81-196645606972905/source",
"state": "file",
"uid": 0
}
Prompting for a password is secure, but can be tedious, especially on repeated runs, and also hinders automation. Thankfully, there are some alternatives for these situations.
Using Ansible Vault with a Password File
If you do not wish to type in the Vault password each time you execute a task, you can add your Vault password to a file and reference the file during execution.
For example, you could put your password in a .vault_pass file like this:
echo 'my_vault_password' > .vault_pass
If you are using version control, make sure to add the password file to your version control software’s ignore file to avoid accidentally committing it:
echo '.vault_pass' >> .gitignore
Now, you can reference the file instead. The --vault-password-file flag is available on the command line. We could complete the same task from the last section by typing:
ansible --vault-password-file=.vault_pass -bK -m copy -a 'src=secret_key dest=/tmp/secret_key mode=0600 owner=root group=root' localhost
You will not be prompted for the Vault password this time.
localhost | SUCCESS => {
"changed": false,
"checksum": "52d7a243aea83e6b0e478db55a2554a8530358b0",
"dest": "/tmp/secret_key",
"gid": 80,
"group": "root",
"mode": "0600",
"owner": "root",
"path": "/tmp/secret_key",
"size": 8,
"state": "file",
"uid": 0
}
Reading the Password File Automatically
To avoid having to provide a flag at all, you can set the ANSIBLE_VAULT_PASSWORD_FILE environment variable with the path to the password file:
export ANSIBLE_VAULT_PASSWORD_FILE=./.vault_pass
You should now be able to execute the command without the --vault-password-file flag for the current session:
ansible -bK -m copy -a 'src=secret_key dest=/tmp/secret_key mode=0600 owner=root group=root' localhost
To make Ansible aware of the password file location across sessions, you can edit your ansible.cfg file.
Open the local ansible.cfg file we created earlier:
nano ansible.cfg
In the [defaults] section, set the vault_password_file setting. Point to the location of your password file. This can be a relative or absolute path, depending on which is most useful for you:
ansible.cfg
[defaults]
. . .
vault_password_file = ./.vault_pass
Now, when you run commands that require decryption, you will no longer be prompted for the vault password. As a bonus, ansible-vault will not only use the password in the file to decrypt any files, but it will apply the password when creating new files with ansible-vault create and ansible-vault encrypt.
Reading the Password from an Environment Variable
You may be worried about accidentally committing your password file to your repository. While Ansible has an environment variable to point to the location of a password file, it does not have one for setting the password itself.
However, if your password file is executable, Ansible will run it as a script and use the resulting output as the password. In a GitHub issue, Brian Schwind suggests the following script can be used to pull the password from an environment variable.
Open up your .vault_pass file in your editor:
nano .vault_pass
Replace the contents with the following script:
.vault_pass
#!/usr/bin/env python3
import os
print os.environ['VAULT_PASSWORD']
Make the file executable by typing:
chmod +x .vault_pass
You can then set and export the VAULT_PASSWORD environment variable, which will be available for your current session:
export VAULT_PASSWORD=my_vault_password
You will have to do this at the beginning of each Ansible session, which may sound inconvenient. However, this effectively guards against accidentally committing your Vault encryption password, which could have serious drawbacks.
Using Vault-Encrypted Variables with Regular Variables
While Ansible Vault can be used with arbitrary files, it is most frequently used to protect sensitive variables. We will work through an example to show you how to transform a regular variables file into a configuration that balances security and usability.
Setting Up the Example
For this example, we will pretend that we are configuring a database server, without actually needing to install a database as a prerequisite.
When you created the hosts file earlier, you placed the localhost entry in a group called database to prepare for this step. Databases usually require a mixture of sensitive and nonsensitive variables. These can be assigned in a group_vars directory in a file named after the group:
mkdir -p group_vars
nano group_vars/database
Inside the group_vars/database file, we’ll add some typical variables. Some variables, like the MySQL port number, are not secret and can be freely shared. Other variables, like the database password, will be confidential:
group_vars/database
---
# nonsensitive data
mysql_port: 3306
mysql_host: 10.0.0.3
mysql_user: fred
# sensitive data
mysql_password: supersecretpassword
We can test that all of the variables are available to our host with Ansible’s debug module and the hostvars variable:
ansible -m debug -a 'var=hostvars[inventory_hostname]' database
localhost | SUCCESS => {
"hostvars[inventory_hostname]": {
"ansible_check_mode": false,
"ansible_version": {
"full": "2.2.0.0",
"major": 2,
"minor": 2,
"revision": 0,
"string": "2.2.0.0"
},
"group_names": [
"database"
],
"groups": {
"all": [
"localhost"
],
"database": [
"localhost"
],
"ungrouped": []
},
"inventory_dir": "/home/sammy",
"inventory_file": "hosts",
"inventory_hostname": "localhost",
"inventory_hostname_short": "localhost",
"mysql_host": "10.0.0.3",
"mysql_password": "supersecretpassword",
"mysql_port": 3306,
"mysql_user": "fred",
"omit": "__omit_place_holder__1c934a5a224ca1d235ff05eb9bda22044a6fb400",
"playbook_dir": "."
}
}
The output confirms that all of the variables we set up are applied to the host. However, our group_vars/database file currently holds all of our variables. This means we can either leave it unencrypted, which is a security concern because of the database password variable, or we encrypt all of the variables, which creates usability and collaboration issues.
Moving Sensitive Variables into Ansible Vault
To solve this issue, we need to make a distinction between sensitive and nonsensitive variables. We should be able to encrypt confidential values and at the same time easily share our nonsensitive variables. To do so, we will split our variables between two files.
It is possible to use a variable directory in place of an Ansible variable file in order to apply variables from more than one file. We can refactor our configuration to take advantage of that ability. First, rename the existing file from database to vars. This will be our unencrypted variable file:
mv group_vars/database group_vars/vars
Next, create a directory with the same name as the old variable file. Move the vars file inside:
mkdir group_vars/database
mv group_vars/vars group_vars/database/
We now have a variable directory for the database group instead of a single file and we have a single unencrypted variable file. Since we will be encrypting our sensitive variables, we should remove them from our unencrypted file. Edit the group_vars/database/vars file to remove the confidential data:
nano group_vars/database/vars
In this case, we want to remove the mysql_password variable. The file should now look like this:
group_vars/database/vars
---
# nonsensitive data
mysql_port: 3306
mysql_host: 10.0.0.3
mysql_user: fred
Next, create a vault-encrypted file within the directory that will live alongside the unencrypted vars file:
ansible-vault create group_vars/database/vault
In this file, define the sensitive variables that used to be in the vars file. Use the same variable names, but prepend the string vault_ to indicate that these variables are defined in the vault-protected file:
group_vars/database/vault
---
vault_mysql_password: supersecretpassword
Save and close the file when you are finished.
The resulting directory structure looks this:
.
├── . . .
├── group_vars/
│ └── database/
│ ├── vars
│ └── vault
└── . . .
At this point, the variables are separate and only the confidential data is encrypted. This is secure, but our implementation has affected our usability. While our goal was to protect sensitive values, we’ve also unintentionally reduced visibility into the actual variable names. It is not clear which variables are assigned without referencing more than one file, and while you may wish to restrict access to confidential data while collaborating, you still probably want to share the variable names.
To address this, the Ansible project generally recommends a slightly different approach.
Referencing Vault Variables from Unencrypted Variables
When we moved our sensitive data over to the vault-protected file, we prefaced the variable names with vault_ (mysql_password became vault_mysql_password). We can add the original variable names (mysql_password) back to the unencrypted file. Instead of setting these to sensitive values directly, we can use Jinja2 templating statements to reference the encrypted variable names from within our unencrypted variable file. This way, you can see all of the defined variables by referencing a single file, but the confidential values will remain in the encrypted file.
To demonstrate, open the unencrypted variables file again:
nano group_vars/database/vars
Add the mysql_password variable again. This time, use Jinja2 templating to reference the variable defined in the vault-protected file:
group_vars/database/vars
---
# nonsensitive data
mysql_port: 3306
mysql_host: 10.0.0.3
mysql_user: fred
# sensitive data
mysql_password: "{{ vault_mysql_password }}"
The mysql_password variable will be set to the value of the vault_mysql_password variable, which is defined in the vault file.
With this method, you can understand all of the variables that will be applied to hosts in the database group by viewing the group_vars/database/vars file. The sensitive parts will be obscured by the Jinja2 templating. The group_vars/database/vault only needs to be opened when the values themselves need to be viewed or changed.
You can check to make sure that all of the mysql_* variables are still correctly applied using the same method as last time.
Note: If your Vault password is not being automatically applied with a password file, add the --ask-vault-pass flag to the command below.
ansible -m debug -a 'var=hostvars[inventory_hostname]' database
localhost | SUCCESS => {
"hostvars[inventory_hostname]": {
"ansible_check_mode": false,
"ansible_version": {
"full": "2.2.0.0",
"major": 2,
"minor": 2,
"revision": 0,
"string": "2.2.0.0"
},
"group_names": [
"database"
],
"groups": {
"all": [
"localhost"
],
"database": [
"localhost"
],
"ungrouped": []
},
"inventory_dir": "/home/sammy/vault",
"inventory_file": "./hosts",
"inventory_hostname": "localhost",
"inventory_hostname_short": "localhost",
"mysql_host": "10.0.0.3",
"mysql_password": "supersecretpassword",
"mysql_port": 3306,
"mysql_user": "fred",
"omit": "__omit_place_holder__6dd15dda7eddafe98b6226226c7298934f666fc8",
"playbook_dir": ".",
"vault_mysql_password": "supersecretpassword"
}
}
Both the vault_mysql_password and the mysql_password are accessible. This duplication is harmless and will not affect your use of this system.
Conclusion
Your projects should have all of the information required to successfully install and configure complex systems. However, some configuration data is by definition sensitive and should not be publicly exposed. In this guide, we demonstrated how Ansible Vault can encrypt confidential information so that you can keep all of your configuration data in one place without compromising security.
