Introduction
Iptables is a firewall that plays an essential role in network security for most Linux systems. While many iptables tutorials will teach you how to create firewall rules to secure your server, this one will focus on a different aspect of firewall management: listing and deleting rules.
In this tutorial, we will cover how to do the following iptables tasks:
List rules
Clear Packet and Byte Counters
Delete rules
Flush chains (delete all rules in a chain)
Flush all chains and tables, delete all chains, and accept all traffic
Note: When working with firewalls, take care not to lock yourself out of your own server by blocking SSH traffic (port :22, by default). If you lose access due to your firewall settings, you may need to connect to it via an out-of-band console to fix your access.
Prerequisites
This tutorial assumes you are using a Linux server with the iptables command installed, and that your user has sudo privileges.
If you need help with this initial setup, please refer to our Initial Server Setup with Ubuntu 20.04 guide. It is also available for Debian and CentOS.
Listing Rules by Specification
Let’s look at how to list rules first. There are two different ways to view your active iptables rules: in a table or as a list of rule specifications. Both methods provide roughly the same information in different formats.
To list out all of the active iptables rules by specification, run the iptables command with the -S option:
sudo iptables -S
-P INPUT DROP
-P FORWARD DROP
-P OUTPUT ACCEPT
-N ICMP
-N TCP
-N UDP
-A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
-A INPUT -i lo -j ACCEPT
-A INPUT -m conntrack --ctstate INVALID -j DROP
-A INPUT -p udp -m conntrack --ctstate NEW -j UDP
-A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,ACK SYN -m conntrack --ctstate NEW -j TCP
-A INPUT -p icmp -m conntrack --ctstate NEW -j ICMP
-A INPUT -p udp -j REJECT --reject-with icmp-port-unreachable
-A INPUT -p tcp -j REJECT --reject-with tcp-reset
-A INPUT -j REJECT --reject-with icmp-proto-unreachable
-A TCP -p tcp -m tcp --dport 22 -j ACCEPT
...
As you can see, the output looks just like the commands that were used to create them, without the preceding iptables command. This will also look similar to the iptables rules configuration files, if you’ve ever used iptables-persistent or iptables save.
Listing a Specific Chain
If you want to limit the output to a specific chain (INPUT, OUTPUT, TCP, etc.), you can specify the chain name directly after the -S option. For example, to show all of the rule specifications in the TCP chain, you would run this command:
sudo iptables -S TCP
-N TCP
-A TCP -p tcp -m tcp --dport 22 -j ACCEPT
Now let’s take a look at the alternative way to view the active iptables rules: as a table of rules.
Listing Rules as Tables
Listing the iptables rules in the table view can be useful for comparing different rules against each other. To output all of the active iptables rules in a table, run the iptables command with the -L option:
sudo iptables -L
This will output all of the current rules sorted by chain.
If you want to limit the output to a specific chain (INPUT, OUTPUT, TCP, etc.), you can specify the chain name directly after the -L option.
Let’s take a look at an example INPUT chain:
sudo iptables -L INPUT
Chain INPUT (policy DROP)
target prot opt source destination
ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED
ACCEPT all -- anywhere anywhere
DROP all -- anywhere anywhere ctstate INVALID
UDP udp -- anywhere anywhere ctstate NEW
TCP tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,ACK/SYN ctstate NEW
ICMP icmp -- anywhere anywhere ctstate NEW
REJECT udp -- anywhere anywhere reject-with icmp-port-unreachable
REJECT tcp -- anywhere anywhere reject-with tcp-reset
REJECT all -- anywhere anywhere reject-with icmp-proto-unreachable
The first line of output indicates the chain name (INPUT, in this case), followed by its default policy (DROP). The next line consists of the headers of each column in the table, and is followed by the chain’s rules. Let’s go over what each header indicates:
target: If a packet matches the rule, the target specifies what should be done with it. For example, a packet can be accepted, dropped, logged, or sent to another chain to be compared against more rules
prot: The protocol, such as tcp, udp, icmp, or all
opt: Rarely used, this column indicates IP options
source: The source IP address or subnet of the traffic, or anywhere
destination: The destination IP address or subnet of the traffic, or anywhere
The last column, which is not labeled, indicates the options of a rule. This is any part of the rule that isn’t indicated by the previous columns. This could be anything from source and destination ports to the connection state of the packet.
Showing Packet Counts and Aggregate Size
When listing iptables rules, it is also possible to show the number of packets, and the aggregate size of the packets in bytes, that matched each particular rule. This is often useful when trying to get a rough idea of which rules are matching against packets. To do so, use the -L and -v options together.
For example, let’s look at the INPUT chain again, with the -v option:
sudo iptables -L INPUT -v
Chain INPUT (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
284K 42M ACCEPT all -- any any anywhere anywhere ctstate RELATED,ESTABLISHED
0 0 ACCEPT all -- lo any anywhere anywhere
0 0 DROP all -- any any anywhere anywhere ctstate INVALID
396 63275 UDP udp -- any any anywhere anywhere ctstate NEW
17067 1005K TCP tcp -- any any anywhere anywhere tcp flags:FIN,SYN,RST,ACK/SYN ctstate NEW
2410 154K ICMP icmp -- any any anywhere anywhere ctstate NEW
396 63275 REJECT udp -- any any anywhere anywhere reject-with icmp-port-unreachable
2916 179K REJECT all -- any any anywhere anywhere reject-with icmp-proto-unreachable
0 0 ACCEPT tcp -- any any anywhere anywhere tcp dpt:ssh ctstate NEW,ESTABLISHED
Note that the listing now has two additional columns, pkts and bytes.
Now that you know how to list the active firewall rules in a variety of ways, let’s look at how you can reset the packet and byte counters.
Resetting Packet Counts and Aggregate Size
If you want to clear, or zero, the packet and byte counters for your rules, use the -Z option. They also reset if a reboot occurs. This is useful if you want to see if your server is receiving new traffic that matches your existing rules.
To clear the counters for all chains and rules, use the -Z option by itself:
sudo iptables -Z
To clear the counters for all rules in a specific chain, use the -Z option and specify the chain. For example, to clear the INPUT chain counters run this command:
sudo iptables -Z INPUT
If you want to clear the counters for a specific rule, specify the chain name and the rule number. For example, to zero the counters for the first rule in the INPUT chain, run this:
sudo iptables -Z INPUT 1
Now that you know how to reset the iptables packet and byte counters, let’s look at the two methods that can be used to delete them.
Deleting Rules by Specification
One of the ways to delete iptables rules is by rule specification. To do so, you can run the iptables command with the -D option followed by the rule specification. If you want to delete rules using this method, you can use the output of the rules list, iptables -S, for some help.
For example, if you want to delete the rule that drops invalid incoming packets (-A INPUT -m conntrack --ctstate INVALID -j DROP), you could run this command:
sudo iptables -D INPUT -m conntrack --ctstate INVALID -j DROP
Note that the -A option, which is used to indicate the rule position at creation time, should be excluded here.
Deleting Rules by Chain and Number
The other way to delete iptables rules is by its chain and line number. To determine a rule’s line number, list the rules in the table format and add the --line-numbers option:
sudo iptables -L --line-numbers
Chain INPUT (policy DROP)
num target prot opt source destination
1 ACCEPT all -- anywhere anywhere ctstate RELATED,ESTABLISHED
2 ACCEPT all -- anywhere anywhere
3 DROP all -- anywhere anywhere ctstate INVALID
4 UDP udp -- anywhere anywhere ctstate NEW
5 TCP tcp -- anywhere anywhere tcp flags:FIN,SYN,RST,ACK/SYN ctstate NEW
6 ICMP icmp -- anywhere anywhere ctstate NEW
7 REJECT udp -- anywhere anywhere reject-with icmp-port-unreachable
8 REJECT tcp -- anywhere anywhere reject-with tcp-reset
9 REJECT all -- anywhere anywhere reject-with icmp-proto-unreachable
10 ACCEPT tcp -- anywhere anywhere tcp dpt:ssh ctstate NEW,ESTABLISHED
...
This adds the line number to each rule row, indicated by the num header.
Once you know which rule you want to delete, note the chain and line number of the rule. Then run the iptables -D command followed by the chain and rule number.
For example, if we want to delete the input rule that drops invalid packets, we can see that it’s rule 3 of the INPUT chain. So we should run this command:
sudo iptables -D INPUT 3
Now that you know how to delete individual firewall rules, let’s go over how you can flush chains of rules.
Flushing Chains
Iptables offers a way to delete all rules in a chain, or flush a chain. This section will cover the variety of ways to do this.
Warning: Be careful to not lock yourself out of your server via SSH by flushing a chain with a default policy of drop or deny. If you do, you may need to connect to it via the console to fix your access.
Flushing a Single Chain
To flush a specific chain, which will delete all of the rules in the chain, you may use the -F, or the equivalent --flush, option and the name of the chain to flush.
For example, to delete all of the rules in the INPUT chain, run this command:
sudo iptables -F INPUT
Flushing All Chains
To flush all chains, which will delete all of the firewall rules, you may use the -F, or the equivalent --flush, option by itself:
sudo iptables -F
Flushing All Rules, Deleting All Chains, and Accepting All
This section will show you how to flush all of your firewall rules, tables, and chains, and allow all network traffic.
Warning: This will effectively disable your firewall. You should only follow this section if you want to start over the configuration of your firewall.
First, set the default policies for each of the built-in chains to ACCEPT. The main reason to do this is to ensure that you won’t be locked out from your server via SSH:
sudo iptables -P INPUT ACCEPT
sudo iptables -P FORWARD ACCEPT
sudo iptables -P OUTPUT ACCEPT
Then flush the nat and mangle tables, flush all chains (-F), and delete all non-default chains (-X):
sudo iptables -t nat -F
sudo iptables -t mangle -F
sudo iptables -F
sudo iptables -X
Your firewall will now allow all network traffic. If you list your rules now, you will will see there are none, and only the three default chains (INPUT, FORWARD, and OUTPUT) remain.
Conclusion
After going through this tutorial, you have seen how to list and delete your iptables firewall rules.
Remember that any iptables changes via the iptables command are ephemeral, and need to be saved to persist through server reboots. This is covered in the Saving Rules section of the Common Firewall Rules and Commands tutorial.
